Date

17 Dec 2024

Time

08:00 – 16:00

Fees

AUD695.00

Note: GST is not applicable

Location

Stirling Business Centre, Perth
Stirling Business Centre, 45 Delawney Street, Balcatta WA 6021
Book Now!
AIR Australia
Oil Diagnostics
AINDT
Ultra-Tek
VBL - Integrated Condition Monitoring

I-ICM Introduction to Condition Monitoring (Perth)

Program Overview

Sustainable, cost-effective machine reliability and operational safety are key challenges of industry groups. Making informed maintenance and operational decisions is critical to this process, as is having the awareness, the right spectrum of monitored information, system integration, and practical training and knowledge to be sustainably informed.

It is estimated at least one third of all maintenance costs are wasted as a direct result of unnecessary or improper maintenance. Add the cost of unnecessary down time and production loss and the equation of sustainability remains a much greater challenge than it need be. The I-ICM awareness training course discusses and workshops important foundational principals and application (and common short falls) of best practice Predictive Maintenance and the primary Condition Monitoring Technologies including:

  • Vibration Analysis
  • Lubrication Management & Analysis
  • Infrared Thermography
  • Ultrasound
  • Combination Technologies and Asset Types

Become aware of the principles, techniques and equipment for collecting, analysing and acting on critical condition monitoring information. Focusing on important, fundamental elements of theory and application to navigate predictive and proactive maintenance and condition monitoring from an informed perspective, and sustainably improve operational safety, reliability, and your bottom line. Learn the importance of awareness and vast opportunity of using what’s been diagnosed and learnt, to fuel the spectrum of proactive opportunities (including many “low hanging fruit”) to identify and mitigate operating risk, patterns of failure and sustainably improve reliability and machine lifecycles. The most successful maintenance programs optimise the application, integration and management of Condition Monitoring technologies in relation to maximising failure mode detection and identification; risk assessment and mitigation; and maintenance planning.

Who Should Attend
  • Maintenance personnel
  • Facility technicians & engineers
  • Reliability personnel
  • Condition monitoring personnel
  • Facility operators
  • Those working towards ISO 18436 Accredited Training & Certification in Condition Monitoring
Course Content
  • Maintenance Strategies
  • Machine Failure Modes & Symptoms
  • Integrated Condition Monitoring
  • Vibration Analysis
    • Vibration monitoring principals
    • Measurement equipment & suitability
    • Vibration analysis & fault detection
    • Analysis case studies & workshop
  • Lubrication Management and Analysis
    • Critical areas of awareness & management
    • Risks to mechanical and machine integrity
    • Simple reliability improvement strategies
    • Practical observation & triggers for concern
    • Lubrication analysis programs
    • Sampling, handling & storage
    • Contamination and control
    • Condition based lubrication
  • Infrared Thermography
    • What is Infrared Thermography
    • Important principals of IR thermography
    • Applied thermography in CM
    • Common knowledge gaps of camera users
    • Pitfalls of application and interpretation
    • Applications of Infrared Thermography
  • Ultrasound
    • What is Ultrasound
    • Important principals of Ultrasound
    • Predictive applications of ultrasound
    • Proactive applications of ultrasound
    • Condition assisted and condition-based lubrication
Course Trainer

Our course trainer Bassim (Baz) Ismail has over 30 years of industry experience in Predictive Maintenance and Machine Condition Monitoring, as a Principal Consultant Engineer and APAC Training Manager. Graduating from UWA in 1991 under the late Professor Michael Norton, he worked for over 30 years with SVT Engineering Consultants, Wood Group and Wood. Introducing and successfully running ISO 18436 Accredited VCAT, LCAT and TCAT training programs in Australia for more than a decade. Bassim is passionate about world class training and accreditation in Predictive and Proactive Maintenance, delivered in everyday language.

Learning Outcomes

Awareness of:

  • Differences in maintenance strategies
  • Machine failure modes and detecting symptoms
  • Predictive applications of Condition Monitoring technologies
  • The common pitfalls and knowledge gaps in condition monitoring
  • The many opportunities to predictively identify and proactively mitigate risk
  • Making better sense of Condition Monitoring analysis reports
  • Practical low hanging opportunities for improvement
  • Proactive opportunities using CM technologies
  • The importance of representative, quality, data collection and sampling, sustainably.
  • Understand the importance of awareness and competency development training

Book Event

I-ICM Introduction to Condition Monitoring (Perth)
$695
Available Tickets: 12
The “I-ICM Introduction to Condition Monitoring (Perth)” ticket is sold out. You can try another ticket or another date.